April 9, 2021 | Advertorial
UPPLANDS VÄSBY, Sweden: Occlusal adjustment is usually a time-consuming process and a very critical phase in restorative dentistry. However, most dentists do not dedicate adequate attention to this process. A recent study showed that around 95% of occlusal readings are incorrect. Misreading results in the dentist removing structure from different occlusal areas, possibly leading to occlusal disturbance.
February 22, 2021 | Advertorial
KOBLACH, Austria: Digitisation holds lucrative opportunities for the future of the dental industry. During its innovative AG.Live CON virtual congress that will take place from 20 to 24 April, Amann Girrbach will be showcasing how these opportunities can be easily exploited. Renowned dental technicians and clinicians will meet with the leading minds in research to explore avenues to advanced digitisation.
February 2, 2021 | Advertorial
COPENHAGEN, Denmark/SCHAAN, Liechtenstein: 3D scanner developer 3Shape and smart product systems manufacturer Ivoclar Vivadent are scaling up their collaborative efforts. Their common goal is to develop the best possible oral health solutions for the health and well-being of patients.
December 28, 2020 | Advertorial
HELSINGBORG, Sweden: Swedish manufacturer of dental consumables Orsing is actively looking into ways to reduce its share of greenhouse gas emissions and has recently introduced a product line entirely manufactured from renewable resources. Orsing’s eco-line includes the coil design saliva ejector Hygoformic Bio with its Hygoformic Bio Adaptor, the Hygovac Bio and Hygovac Vent Bio aspirator tubes, and the Bio Cup dental cup made of bamboo fibre.
HELSINKI, Finland: The popular Planmeca Digital Dentistry World Tour will bring Planmeca’s trailblazing digital dentistry solutions directly to dental professionals again in 2020. Starting at the end of November, the world tour will feature captivating and informative virtual shows in several languages and across multiple regions.
September 4, 2020 | Advertorial
HELSINKI, Finland: Dr Seppo Lindroos is an experienced dentist and the founder of the MEDIDENT dental clinic, located in Helsinki. The clinic is fully equipped with Planmeca devices, including a Planmeca Sovereign Classic dental unit, a Planmeca Emerald intra-oral scanner, a Planmeca ProMax 2D imaging unit and a Planmeca ProScanner imaging plate scanner.
March 31, 2020 | Advertorial
HELSINKI, Finland: The Planmeca Solanna Vision operating light with integrated 4K cameras has been awarded a Red Dot in this year’s Red Dot Award: Product Design competition.
August 19, 2019 | Advertorial
HELSINKI, Finland: Three-dimensional dental imaging technology and software continue to make great strides when it comes to improving image quality. However, despite the progress made in the last decade, some challenges remain. So how do you achieve a great image? Planmeca’s Product Development Manager of Imaging Algorithms, Mikko Lilja, says it is a combination of three C’s: contrast, crispness and correcting artefacts.
May 17, 2019 | Advertorial
HELSINKI, Finland: Digital dentistry has been talked about as the future of the industry for nearly two decades, but as digital dental technology gradually shifts from new to normal in the dental clinic, where is dentistry heading next? The answer is likely to be found in one small four-letter word: data.
February 21, 2019 | Advertorial
COLOGNE, Germany: LM-Dental, one of the world’s leading manufacturers of ergonomic dental instruments, actively works with dental clinics to ensure its product development remains at the cutting edge. This collaboration has revealed many challenges related to material handling and traceability, with increasing requirements for patient safety and documentation often emphasised. Logistics and maintenance could also be managed better and more effectively. In response to these challenges, LM-Dental has developed the LM Dental Tracking System (LM DTS), the first commercially available system in the dental industry to efficiently track and monitor dental instruments, handpieces and materials from different manufacturers using an advanced radio-frequency identification (RFID) technology.
April 18, 2018 | Advertorial
HELSINKI, Finland: In seeking to strengthen Planmeca’s management and to support its distribution business, the Finland-based company has recently announced the appointment of Janne Anttila to head the Plandent Division in Scandinavia and northern Europe. Anttila has worked for Plandent in Finland for over ten years, leading the company for the past eight.